Key points are not available for this paper at this time.
In the continuous casting of low-density and high-strength steel, minimising or eliminating steel–slag reactions is imperative to ensure stable slag properties and a smooth casting process. This study conducted steel–slag contact experiments at 1400 °C, based on thermodynamic calculations predicting the reaction trends of the proposed CaO–BaO–Al 2 O 3 –CaF 2 –Li 2 O mould slag with low-density and high-strength steel containing 8 wt-% Al. The changes in compositions, rheological, and solidification characteristics of slags pre- and post-reaction are analysed. The findings reveal that only Li 2 O reacts with Al in the steel, forming LiAlO 2 rather than Al 2 O 3 . Reactivity is affected by component activity and the partial pressure of Li vapour at the reaction interface, established to vary between 0.154 and 0.253 atm. Within the current range of slag composition, increasing Al 2 O 3 and reducing Li 2 O content in the slag inhibits the slag–metal reaction. Specifically, Li 2 O remains unreactive with Al when 2.5 wt-% 27 wt-%. Conversely, the reaction occurs when Li 2 O > 4.5 wt-% and Al 2 O 3 < 18 wt-%. In conclusion, low- and non-reactive mould slags suitable for casting low-density and high-strength steel are proposed, considering both reactivity and stable slag properties.
Yan et al. (Tue,) studied this question.