Key points are not available for this paper at this time.
Abstract Based on Mindlin solution and the theory of unsaturated soil mechanics, the theoretical solutions of shear stress and axial force distribution in the elastic stage of full-length binding-type anti-floating bolts were derived, and the bearing capacity characteristics of such bolts and the influencing factors were analyzed. In this paper, the design parameters of anti-floating anchor in a negative two-floor basement of a commercial square are substituted into the formula derived in this paper. The results show that, in unsaturated soil, the shear stress and axial force of the full-length bonded anti-floating anchor are distributed along the total length of the anchor, but neutral points appear in both of them, which is mainly due to the reduction of the axial force and shear stress of the anti-floating anchor caused by the matric suction. The formula derived in this paper is used to analyze the factors affecting the bearing capacity of anti-floating anchor bolt in unsaturated soil. The results show that: the greater the elastic modulus of soil mass, the greater the peak value of shear stress curve, the closer the peak value is to the head of anchor bolt, and the greater the axial force decline rate. With the increase of anchor solid diameter D, the peak value of shear stress decreases, the peak value moves backward, the neutral point moves forward, the negative shear stress value increases, the decline rate of axial force distribution curve decreases, but the negative axial force increases. With the increase of the additional shear stress τ 0 , the peak value of the shear stress curve decreases, the peak value moves to the hole of the anchor rod, the neutral point moves to the hole, the negative shear stress increases, the decline rate of the axial force distribution curve increases, and the negative axial force increases.
Fu et al. (Wed,) studied this question.