Key points are not available for this paper at this time.
Industrial effluents or process waters generated from spent lithium-ion batteries (LIBs) recycling operations often contain high concentrations of lithium ions (Li+). This study characterizes the composition of process water obtained from pre-treatment and concentration operations of LIBs recycling. Ion-exchange experiments are conducted using synthetic lithium solutions (1 g/L) and industrial waters to understand Li+ recovery. Employing four commercial cationic resins, fast Li+ exchange kinetics are observed fitting the pseudo-second order model. The equilibrium isotherm data corresponds to the Langmuir adsorption model and reveals a Li capacity of 30-32 mg/g using AmberliteTM IRC 120 H, 70 mg/g using Lewatit® TP 308 H, 37-40 mg/g using Lewatit® TP 208 Na, and 37-41 mg/g using Lewatit® TP 260 Na. While the resins initially demonstrate moderate affinity for Li+, this can be significantly enhanced by increasing the Li+ concentration. Notably, as LIBs recycling operation effluents typically contain minimal competing ions, these results underscore the potential of employing ion exchange as a viable method to recover and concentrate lithium before precipitation into lithium salts.
Salces et al. (Wed,) studied this question.