Key points are not available for this paper at this time.
Hydrogen-enhanced decohesion (HEDE) is one of the many mechanisms of hydrogen embrittlement, a phenomenon that severely impacts structural materials such as iron and iron alloys. Grain boundaries (GBs) play a critical role in this mechanism, where they can provide trapping sites or act as hydrogen diffusion pathways. The interaction of H with GBs and other crystallographic defects, and thus the solubility and distribution of H in the microstructure, depends on the concentration, chemical potential, and local stress. Therefore, for a quantitative assessment of HEDE, a generalized solution energy in conjunction with the cohesive strength as a function of hydrogen coverage is needed. In this paper, we carry out density functional theory calculations to investigate the influence of H on the decohesion of the 5 (310) 001 and 3 (112) 110 symmetrical tilt GBs in bcc Fe, as examples for open and close-packed GB structures. A method to identify the segregation sites at the GB plane is proposed. The results indicate that at higher local concentrations, H leads to a significant reduction of the cohesive strength of the GB planes, significantly more pronounced at the 5 than at the 3 GB. Interestingly, at finite stress, the 3 GB becomes more favorable for H solution, as opposed to the case of zero stress, where the 5 GB is more attractive. This suggests that, under certain conditions, stresses in the microstructure can lead to a redistribution of H to the stronger grain boundary, which opens a path to designing H-resistant microstructures. To round up our study, we investigate the effects of typical alloying elements in ferritic steel, C, V, Cr, and Mn, on the solubility of H and the strength of the GBs.
Guzmán et al. (Thu,) studied this question.