Key points are not available for this paper at this time.
Abstract Achieving high strength, ductility, and toughness via microstructure design is challenging due to the interrelated dependencies of strength and ductility on microstructural variables. As a natural extension of the microstructure design work in Bhattacharyya and Agnew (Microstructure design of multiphase compositionally complex alloys I: effects of strength contrast and strain hardening, 2024), an optimization framework to obtain the microstructure that maximizes the toughness is described. The strategy integrates a physics-based crystal plasticity model, which accounts for damage evolution within the reinforcement through a “vanishing cracked particle” model that is governed by Weibull statistics, and a genetic algorithm-based optimization routine. Optimization constraints are imposed in the form of bounds on the microstructure parameters such that they are most likely attainable by conventional thermomechanical processing. Various matrix strain hardening behaviors are considered, as well as the strength contrast between the two phases and fracture behavior of the reinforcement. It is shown that the addition of a fine-grained (hard) reinforcing phase is preferred as is a matrix that exhibits sustained strain hardening such as is observed under TRIP/TWIP scenarios. Finally, the Pareto-optimal set of solutions for several scenarios are presented which offer new insights into the linkages between microstructure and mechanical properties.
Bhattacharyya et al. (Fri,) studied this question.