Air flotation separation technology has emerged as one of the core techniques for oily wastewater treatment in oilfields, owing to its advantages of high throughput, high separation efficiency, and short retention time. Originally applied in mineral processing, this technology was first introduced to oilfield produced water treatment by Shell in 1960. With the optimization of microbubble generators, advances in microbubble generation technology—characterized by small size, high stability, and uniformity—have further expanded its applications across various wastewater treatment scenarios. To optimize the separation performance of a horizontal compact closed-loop cyclonic air flotation unit, this study employs CFD numerical simulation to investigate two key aspects: First, for the flotation zone, the effects of structural parameters (deflector height, inclination angle) and operational parameters (gas–oil ratio, bubble size, inlet velocity) on flow patterns and gas distribution were systematically examined. Device performance was evaluated using metrics such as gas–oil ratio distribution curves and flow field characteristics, enabling the identification of operating conditions for stratified flow formation and the determination of optimal deflector structural parameters. Second, based on the Eulerian multiphase flow model and RSM turbulence model, a numerical simulation model for the oil–gas–water three-phase flow field was established. The influences of key parameters (bubble size, throughput, gas–oil ratio) on oil–water separation efficiency were investigated, and the optimal operating conditions for the unit were determined by integrating oil-phase/gas-phase distribution characteristics with oil removal rate data. This research provides theoretical support for the structural optimization and engineering application of horizontal compact closed-loop cyclonic flotation units.
Xiao et al. (Fri,) studied this question.