What question did this study set out to answer?

To design and program a multifunctional device for measuring and terminating accelerator beams.

January 22, 2026Open Access

Design and Programming of a Multifunctional Device for Accelerator Beam Profile Measurement and Beam Stop

Key Points

To design and program a multifunctional device for measuring and terminating accelerator beams.
Modification of the last-stage wire scanner in the Medium Energy Beam Transport system.
Incorporation of a new Beam Stop to enhance beam diagnostics efficiency.
Development of advanced sensing mechanisms for beam profile measurement.
Enhanced efficiency of the wire scanner after modifications.
Successful integration of a braided carbon fiber plate as the new Beam Stop.
Improved capabilities for beam diagnostics under high-intensity conditions.

Abstract

During the pre-research phase of China Spallation Neutron Source (CSNS) upgrade project (CSNS-II), in order to conduct beam commissioning of the Radio Frequency Quadrupole (RFQ) under high-intensity beam conditions, The structure of the last-stage wire scanner of the Medium Energy Beam Transport (MEBT) was innovatively modified. This modification not only added a Beam Stop but also significantly enhanced the efficiency of wire scanner. This paper presents the architecture and operational programming of a novel multifunctional device designed for accelerator beam diagnostics and beam termination: beam profile measurement via advanced sensing mechanisms and Beam Stop using a braided carbon fiber plate as the primary beam stop.

Read Full Paperexternally

AI에게 질문

Bookmark

View Full Paper