In Building Information Modeling (BIM) of bridge piers, persistent limitations have been observed in the modeling of spiral hoop rebar with variable pitch and diameter. Taking Revit as an example, its built-in family files can only generate spirals with constant geometry. When dealing with non-uniform rebar, designers often have to rely on segmented modeling or manual operations, which is not only time-consuming but also prone to deviations. To solve this problem, this paper proposes a parameterized modeling method based on the secondary development of Revit. By combining the Revit API with the C# programming language, the spiral equation is embedded into the Non-Uniform Rational B-Spline (NURBS) curve reconstruction framework, realizing the continuous modeling of spiral hoop rebar in a unified model. This method also allows users to flexibly input parameters such as cover thickness, rebar diameter, and segment length through a graphical user interface. Through comparative experiments, the proposed method and the traditional family file modeling method were verified respectively in the modeling of a single column and an entire bridge pier. The results indicate that the proposed method reduces the average modeling time of a single bridge pier by 66.5% and that of the entire project by 48.7%. While maintaining high geometric accuracy, this method significantly shortens modeling time and reduces workload, especially demonstrating higher consistency in pitch transition sections and conical sections. Beyond technical performance, this study also demonstrates that the secondary development of Revit provides a practical and feasible solution for the efficient, precise, and generalizable modeling of complex reinforcing bar components in terms of expanding BIM functions, which holds significant practical implications.
Li et al. (Tue,) studied this question.