This study addresses the inline dielectric characterization of liquids using a prototype planar resonant sensor with two capacitively coupled spirals, fabricated by inkjet printing on a Rogers RO4003C substrate. The device includes a central hole designed to host a sample vial or a pipe, enabling contactless characterization of liquid solutions, including biological samples. Experimental validation includes stylus profilometry and optical microscopy to verify the thickness, uniformity, and continuity of the conductive film, as well as scattering parameter measurements in the frequency range from 3.5 GHz to 4.0 GHz. The frequency response exhibits two distinct resonances; the corresponding resonance parameters for each mode (resonant frequency fr, amplitude, and quality factor Q) were extracted through complex-domain fitting using Lorentzian profiles. The electrical characterization of the device was assessed as a function of the effective permittivity of water–ethanol test mixtures by varying the ethanol volume fraction. The proposed sensor showed a monotonic and nearly linear response to ethanol concentration, with frequency sensitivities of approximately 20 kHz/% and coefficients of determination up to R2=0.99.
Arruzzoli et al. (Sun,) studied this question.