Although the market recently shifted toward low- or non-alcoholic drinks, the beer sector is an important branch of industry in Europe. It stimulates local economies and communities, thereby justifying the need for its development. Both economic and environmental benefits could be achieved through proper management of the generated by-products, enabling them to stay in a loop. Such an approach aligns with currently postulated sustainability-oriented trends. Herein, a solution for the simultaneous management of the two main by-products of beer production is described. The spent yeast (SY) was used as a potential binder for brewers’ spent grain (BSG)-based products, representing a highly innovative solution given the state of the art. Using SY without treatment or with minimal addition of common organic acids (citric, succinic, and tartaric) enabled efficient bonding of the final product. It yielded properties similar to those of commercial counterparts, with a flexural modulus exceeding 1 GPa and a flexural strength exceeding 6 MPa. Because of the nature of the applied raw materials and their inherent moisture sensitivity (water contact angle 80°), potentially broadening its application range. The application potential was confirmed from a technical point of view through the efficient manufacturing of disposable plates. Nevertheless, their implementation in industrial practice must be preceded by meeting proper criteria for food-contact materials related to the stability and odor of the plates and coatings and migration of their components into food products.
Hejna et al. (Wed,) studied this question.