Azo dyes in textile industry effluents cause major environmental problems, highlighting the need to remove these compounds before discharge. The Nyex Rosalox™ (NR) process, a water treatment process that combines adsorption, electrochemical oxidation, and in situ regeneration using a patented novel graphite-based adsorbent (Nyex™ 2000 media), could potentially be used to remove azo dyes before being discharged. In this study the efficiency of the NR process for removing these compounds is assessed. Analyses indicate that (i) the Nyex™ media was able to adsorb all azo dyes quickly, with 50% of the total dye absorbed being absorbed in the first 30 min and >10% in the first minute alone and (ii) all azo dyes used were completely oxidised during the NR process without the formation of any detectable harmful byproducts that were previously observed during the electrochemical oxidation of azo dyes, with only a relatively small amount of energy needed to enable optimal electrochemical oxidation. The Nyex™ media can be consistently regenerated, maintaining its adsorptive capacity after extensive reuse, albeit the use of fresh adsorbent will always have a slightly greater adsorptive capacity. Combined, these findings suggest that the NR process can effectively destroy azo dyes with relatively low energy, proving an effective method of water treatment without producing harmful secondary pollutants.
Cullen et al. (Wed,) studied this question.