This study develops a multi-scale fiber-reinforced cementitious composite (MFRC) by hybridizing calcium carbonate whisker (CW), polyvinyl alcohol (PVA) fiber, and steel fiber. The interfacial micromechanical properties between steel fiber/matrix and PVA fiber/matrix under the influence of CW were systematically examined through single-fiber pull-out tests. The two-dimensional and three-dimensional distribution characteristics of fibers in the MFRC were analyzed using backscattered electron imaging (BSE) and X-ray computed tomography (X-CT), respectively. Based on the fiber distribution characteristics, flexural strength prediction models were developed with R2 values of 0.79 (2D) and 0.82 (3D). Experimental validation via splitting tensile tests and three-point bending tests confirmed the model’s effectiveness in simultaneously predicting splitting tensile strength (R2 = 0.89) and flexural strength (R2 = 0.93). These findings demonstrate the reliability and universality of the proposed model for predicting flexural–tensile strength in an MFRC.
Lu et al. (Sat,) studied this question.