To meet the requirements of flexibility and high performance for energy storage devices in flexible wearable electronic equipment, the MnO2/acetylene black composite flexible cathodes is fabricated via 3D printing technology and the aqueous manganese-based zinc-ion flexible batteries are assembled. Based on bending and torsion mechanical tests, and the electrochemical tests, the optimal 3D printing electrode structure was determined. The micromorphology of the electrode after mechanical tests shows that when the printed lines of the upper and lower layers form a 30° angle, the electrode sheet exhibits the least damage. Electrochemical tests indicated that it had an ohmic resistance of 2.052 Ω, an interfacial charge transfer resistance of 141.1 Ω, a specific capacity of 103 mAh/g at 50 mA/g, and a specific capacity of 65 mAh/g at 500 mA/g. Compared with traditional coated electrodes, the 3D-printed electrode showed significantly improved diffusion coefficient, conductivity, and cycle stability. The assembled 3D-printed flexible battery could stably power a 1.5 V LED bulb under flat, bent, and twisted states. It provides a feasible solution for the development of high-performance flexible energy storage devices.
Ju et al. (Thu,) studied this question.