Abstract Surrogate-based Bayesian optimization has been widely applied in design optimization to increase sampling efficiency. However, the cost for each evaluation of the objective function can still be very high when physical experiments or large-scale simulations are involved. Multi-fidelity Bayesian optimization is the new approach to further improve the sampling efficiency by reducing the number of expensive samples at the highest fidelity level and supplementing them with less expensive ones at low-fidelity levels. In this paper, a new consequential improvement (CI) acquisition function is proposed to allow for the simultaneous selection of the solution and the fidelity level in problems with a known hierarchy of fidelity levels. The new CI acquisition function incorporates the consequential effectiveness of objective improvement with the considerations of cost, accuracy, and validity differences between high- and low-fidelity samples in engineering practice. The new method of multi-fidelity Bayesian optimization based on the CI is demonstrated with several analytical and simulation-based design examples. In the simulation-based design optimization example, the results show that the CI acquisition function has a decisive advantage in the sampling efficiency over the other methods of multi-fidelity Bayesian optimization with simultaneous selection. The results indicate that the proposed method is particularly advantageous in solving high-dimensional problems and when large cost ratios between high- and low-fidelity evaluations exist and high-fidelity validation is mandatory. Furthermore, the method robustly avoids the prevalent issue of over sampling at low-fidelity levels.
Aydogdu et al. (Fri,) studied this question.