High-quality ceramsite is prepared from solid waste (red mud, phosphogypsum, copper slag and poplar sawdust), and subsequently modified with nitric acid for removal of Pb 2+ from wastewater. The microstructure and phase composition of the ceramsite before and after modification are systematically characterized, and the corresponding Pb 2 ⁺ adsorption performance is thoroughly investigated. Characterization analysis reveals that modification ceramsite possesses a well-developed pore structure and abundant surface functional groups with specific surface area of 50.68 m 2 /g, which is larger than original ceramsite. Pb 2+ adsorption amount of modification ceramsite is 175.73 mg/g at pH of 5, which is 1.24 times higher than that of the original ceramsite. Coexisting ions in wastewater exhibit minimal interference with Pb 2 ⁺ adsorption. In addition, the Pb 2+ adsorption amount remains at 62.11mg/g after three cycles, demonstrating good cyclic stability. The adsorption mechanism analysis shows that the removal of Pb 2+ by modification ceramsite mainly involves ion exchange, electrostatic adsorption, surface complexation and precipitation.
Yang et al. (Fri,) studied this question.