Predictive process parameter selection for Selective Laser Melting Manufacturing: Applications to high thermal conductivity alloys

There is growing interest in Laser Powder Bed Fusion (L-PBF) or Selective Laser Melting (SLM) manufacturing of high conductivity metals such as copper and refractory metals. SLM manufacturing of high thermal conductivity metals is particularly difficult. In case of refractory metals, the difficulty is amplified because of their high melting point and brittle behaviour. Rapid process development strategies are essential to identify suitable process parameters for achieving minimum porosities in these alloys, yet current strategies suffer from several limitations. We propose a simple approach for rapid process development using normalized process maps. Using plots of normalized energy density vs. normalized hatch spacing, we identify a wide processability window. This is further refined using analytical heat transfer models to predict melt pool size. Final optimization of the parameters is achieved by experiments based on statistical Design of Experiments concepts. In this article we demonstrate the use of our proposed approach for development of process parameters (hatch spacing, layer thickness, exposure time and point distance) for SLM manufacturing of molybdenum and aluminium. Relative densities of 97.4% and 99.7% are achieved using 200 W pulsed laser and 400 W continuous laser respectively, for molybdenum and aluminium, demonstrating the effectiveness of our approach for SLM processing of high conductivity materials.