With the vigorous promotion of the modernization of China’s construction industry, the proportion of prefabricated buildings in new construction projects has increased steadily. Grouted sleeve connection is a mainstream joining method for prefabricated components, and the performance of grouting materials is crucial to connection reliability. In this study, a modified polyurethane composite (MPC) was developed as a novel sleeve grouting material, and seven grouted splice specimens with different steel bar strength grades and anchorage lengths were fabricated for uniaxial tensile tests. The mechanical properties of MPC and the connection performance of specimens were systematically investigated, and the effects of steel bar strength grade and anchorage length on ultimate load, average bond strength, and strain characteristics were quantitatively analyzed. The results show that MPC has excellent fluidity, and its mechanical strengths meet the specified requirements. Increasing steel bar strength grade and anchorage length significantly improves ultimate load: at a 6d anchorage length, the ultimate load of the S600 series (HRB600E) is 44.85% higher than that of the S400 series (HRB400E); extending the S400 series’ anchorage length from 4d to 8d increases ultimate load by 50.61%. Average bond strength decreases with increasing anchorage length (S400-MPC-8d is 24.70% lower than S400-MPC-4d) but increases with higher steel bar strength grade (S600-MPC-6d is 32.37% higher than S400-MPC-6d). The sleeve remains elastic during the test, ensuring safety. Prediction formulas for average bond strength under slip failure were established, with good agreement between predicted and experimental results. For both HRB400E and HTRB600E steel bars, considering safety and installation errors, a critical anchorage length of 8d is recommended for engineering design.
Shu et al. (Tue,) studied this question.