The application of rheological modeling in polyolefin-based systems has gained increasing attention in the context of sustainable materials and circular economy strategies. In particular, the use of recycled polyolefins reinforced with lignocellulosic fillers presents significant opportunities, but also introduces challenges associated with structural heterogeneity, degradation, and variability in processing behavior. Despite rheology’s central role in linking structure, processing, and properties, its use as a predictive tool in recycled systems remains insufficiently systematized. This work presents a systematic review conducted according to PRISMA guidelines to analyze the use of rheological models in polyolefin-based systems, with particular emphasis on their applicability to recycled materials and composite formulations. We analyze 50 studies using a structured data extraction protocol. The results show that rheological modeling approaches can be organized into a hierarchical framework ranging from indirect flow parameters and generalized Newtonian fluid models to viscoelastic, structural, multiscale, and hybrid approaches. However, these approaches are not evenly distributed across system types. Advanced models are predominantly applied to compositionally controlled systems, whereas recycled and post-consumer polyolefins are mainly addressed using simplified models or experimental characterization. The analysis further indicates that rheology is primarily used for data fitting and process simulation, with limited application as a predictive tool for material formulation. Quantitative trends reported in the literature indicate that filler incorporation typically increases viscosity by approximately 20–200%, depending on filler content, dispersion quality, and interfacial interactions. However, variability in experimental conditions and material heterogeneity significantly limits cross-study comparability. From a mechanistic perspective, the main limitation lies not in the availability of rheological models but in their adaptability to heterogeneous systems characterized by variable composition, degradation, and limited experimental accessibility. This review identifies a gap between the development of rheological models and their application in recycled polyolefin systems. Future progress on eco-composite design will require further development of integrative approaches that balance physical insight, predictive capability, and experimental feasibility. In this context, rheology should be repositioned from a post-characterization technique to a central tool for the design and optimization of sustainable polymer composites. From an applied perspective, these findings support the use of rheological parameters as practical indicators for guiding formulation strategies and optimizing processing conditions in recycled polyolefin-based materials.
Spíndola-Barrón et al. (Fri,) studied this question.