Optimal MPPT and BES Control for Grid-Tied DFIG-Based Wind Energy Conversion System

As the wind energy is progressively pursued to supplement conventional power generation, the stochastic wind behavior considerably deteriorates power quality (PQ) and stability of the connected grid. This article is attributed to the comprehensive control design of the grid-integrated doubly fed induction generator (DFIG) wind energy system that aims to address encountered wind variability and PQ intricacies. Battery energy storage with bidirectional dc–dc converter control is assimilated at the dc-link of the DFIG that regulates the dc-link voltage to mitigate the wind power fluctuations in specified grid power modes. A higher order adaptive control for grid-interfaced converter accurately computes desired weights of various components to exercise accurate power balance and PQ control. Moreover, a novel Jaya particle swarm optimization algorithm is adopted for the optimal tuning of wind maximum power point tracking and the dc-link voltage PI controller parameters that significantly improves steady-state and dynamic responses of both the controllers. The rotor speed converges faster with precise reference tracking that leads to almost zero steady-state error using optimized PI controller gains. Along with the attenuated initial overshoot and fast settling time during sudden large step wind speed change, the dc-link voltage also characterizes superior response with optimal tuning during load unbalance and abnormal grid voltage conditions. The presented control strategy analyzes the capability of DFIG system under variable wind-speed changes, specified grid power modes, load changes, and other grid disturbances. The satisfactory system response is endorsed through experimental results conducted on a laboratory prototype.