Modifying user-defined logic for test access to embedded cores

Testing embedded cores is a challenge because access to core I/Os is limited. The user-defined logic (UDL) surrounding the core may restrict the set of test vectors that can be applied to the core. Consequently, some of the core test vectors specified by the core supplier may not be contained in the output space of the UDL that drives the core and hence cannot be justified at the core inputs. Conventional solutions to this problem involve placing multiplexers or boundary scan elements at the inputs of the core to provide test access. This can be very costly in terms of area and performance. This paper presents a new approach for providing test access to an embedded core. A procedure is described for inserting control points in the UDL to modify its output space so that it contains the specified core test vectors. The flexibility in selecting the location of the control points is used to avoid performance degradation by keeping test logic off the critical timing paths. Experimental results are shown comparing the control point insertion procedure with other approaches.