High-power 355 nm ultraviolet (UV) lasers, leveraging their short wavelength, high photon energy, and high absorption across a broad range of materials, have become indispensable light sources for precision manufacturing, semiconductor processing, and laser direct imaging (LDI). In this paper, we demonstrate a high-power 355 nm UV laser system based on a narrow-linewidth polarization-maintaining (PM) Yb-doped fiber laser and cascaded frequency conversion. A single-frequency semiconductor laser is employed as the seed source, with its spectral linewidth broadened to 0.32 nm (full width at half maximum, FWHM) via phase modulation to suppress stimulated Brillouin scattering (SBS). Through a PM master oscillator power amplifier (MOPA) architecture, a maximum average output power of 899 W at 1064 nm is achieved with a beam quality factor of M2 = 1.12 (M2x = 1.11, M2y = 1.13). By employing lithium triborate (LiB3O5, LBO) crystals for extracavity cascaded second-harmonic generation (SHG) and sum-frequency generation (SFG), a maximum green output power of 613.7 W at 532 nm is obtained, corresponding to a SHG conversion efficiency of 68.2%, and a maximum UV output power of 227.1 W at 355 nm is achieved, with a total conversion efficiency of 25.2%. At the maximum output power, the UV beam quality factors are M2 = 1.16 (M2x = 1.24 and M2y = 1.09), and the power fluctuation is better than ±1.5% root-mean-square (RMS) over 8 h of continuous operation. These results indicate that the cascaded frequency conversion approach based on narrow-linewidth PM fiber lasers possesses the capability for further scaling to higher-power single-path high-brightness UV output and can provide high-brightness UV sources for applications such as flexible printed circuit (FPC) laser cutting, flat-panel display laser direct imaging, and semiconductor wafer scribing.
Huang et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: