Key points are not available for this paper at this time.
In this paper, we propose a beam-oriented digital predistortion (BO-DPD) technique for power amplifiers (PAs) in hybrid beamforming massive multiple-input multiple-output (MIMO) transmitters, which can achieve linearization of the transmitted signal in the main beam direction and address the DPD implementation issue in the hybrid beamforming array. In massive MIMO hybrid beamforming transmitters, the conventional DPD to linearize each PA is impractical to implement for that the number of digital chains is less than the number of PAs; however, the BO-DPD can resolve this issue by constructing and linearizing the “virtual” main beam signal rather than single PAs. According to the beamforming weights for array elements, the feedback path combines all PA’s outputs to estimate the main beam signal for DPD processing. In addition, an average estimation method is also presented to broaden the linearized angle range around the main beam direction. A 4 16 (four subarrays and 16 antennas in each subarray) uniform linear array (ULA) simulation along with a 1 2 ULA at 2. 5 GHz and a 2 2 ULA at 3. 5-GHz experimental tests was performed. The experimental results show that the proposed technique and linearization angle range broadening method achieve up to 15-dB adjacent channel power ratio improvement and 10° linearization angle range in the main beam direction.
Liu et al. (Tue,) studied this question.