Key points are not available for this paper at this time.
Suspended monorail systems are increasingly adopted in urban rail transit due to their small land requirements and environmental benefits. However, welded details in track beams are prone to fatigue cracking under repeated service loads, posing risks to long-term structural safety. This study investigates the fatigue performance of suspended monorail track beams through 1:4 scaled fatigue experiments and finite element (FE) simulations. Critical fatigue-sensitive locations were identified at the mid-span longitudinal stiffener–bottom flange weld toe and the mid-span web–bottom flange weld toe. Under the most unfavorable operating condition (train speed of 30 km/h), the corresponding hot-spot stresses were 28.48 MPa and 27.54 MPa, respectively. Stress deviations between scaled and full-scale models were within 7%, verifying the feasibility of using scaled models for fatigue studies. Fatigue life predictions based on the IIW hot-spot stress method and Eurocode S–N curves showed that the critical details exceeded the 100-year design requirement, with estimated fatigue lives of 2.39 × 108 and 5.95 × 108 cycles. Furthermore, a modified damage equivalent coefficient method that accounts for traffic volume and train speed was proposed, yielding coefficients of 2.54 and 3.06 for the two fatigue-prone locations. The results provide a theoretical basis and practical reference for fatigue life evaluation, design optimization, and code development of suspended monorail track beam structures.
Han et al. (Sat,) studied this question.