Key points are not available for this paper at this time.
We report electroabsorption and electroluminescence investigations of polymer light-emitting diodes featuring a LiF/Ca/Al cathode, for efficient electron injection into the electroluminescent polymer layer. Our measurement of the built-in potential gives direct evidence of a sizeable reduction of the cathodic barrier height not only with respect to Ca, but also versus LiF/Al or CsF/Al bilayer cathodes, currently amongst the most efficient electron injectors for low electron affinity polymers. In blue-emitting (∼2.7 at peak) polyfluorene-based LEDs, with poly(ethylenedioxythiophene)/poly(styrene sulphonic acid) anodes and LiF/Ca/Al cathodes, we measure a built-in potential of 2.7 V, a luminance of ∼1600 cd/m2 (the highest among the devices studied here) at a driving voltage of 5 V, and efficiencies as high as ∼3 lm/W. We also find that the turn-on voltage essentially coincides with the built-in potential within the experimental error.
Brown et al. (2001) studied this question.