Key points are not available for this paper at this time.
Market needs for airborne and spaceborne imagery used in photogrammetry and GIS applications are changing. Fundamental changes in sensors, platforms and applications are currently taking place. Most recently, new high resolution spaceborne sensors have become available. Besides classical photogrammetry, new thematic applications will drive the future image market. Savings in cost and time, together with the need for higher and reproducible radiometric resolution or spectral information will push forward the change from analogue to digital imagery. High resolution satellites will compete with airborne film‐based photography and digital camera systems. With the availability of a digital airborne camera, it is possible to completely close the digital chain from image acquisition to exploitation and data distribution. The key decision regarding the camera design in this case is whether a linear or area array sensor should be used. In view of the high geometric accuracy requirements in photogrammetry, Z/I Imaging has focused development on a digital camera based on an area sensor. An essential aspect of this decision was not only the aerial camera system, but also the entire photogrammetric process to the finished photographic or mapping product. If this point of view is adopted, it becomes clear that the development of a digital camera involves more than simply exchanging film for silicon. Aspects such as data transfer rates, in‐flight data processing and storage, image archiving, georeferencing, colour fusion, calibration and preprocessing have the same influence on the economic assessment of a digital camera system. This paper describes current development activities and application aspects of a digital modular airborne camera system.
Hinz et al. (Sun,) studied this question.