Key points are not available for this paper at this time.
The IEEE 802.11 Wireless LAN standards allow multiple non-overlapping frequency channels to be used simultaneously to increase the aggregate bandwidth available to end-users. Such bandwidth aggregation capability is routinely used in infrastructure mode operation, where the traffic to and from wireless nodes is distributed among multiple interfaces of an access point or among multiple access points to balance the traffic load. However, bandwidth aggregation is rarely used in the context of multi-hop 802.11-based LANs that operate in the ad hoc mode. Most past research efforts that attempt to exploit multiple radio channels require modifications to the MAC protocol and therefore do not work with commodity 802.11 interface hardware. In this paper, we propose and evaluate one of the first multi-channel multi-hop wireless ad-hoc network architectures that can be built using standard 802.11 hardware by equipping each node with multiple network interface cards (NICs) operating on different channels. We focus our attention on wireless mesh networks that serve as the backbone for relaying end-user traffic from wireless access points to the wired network. The idea of exploiting multiple channels is particularly appealing in wireless mesh networks because of their high capacity requirements to support backbone traffic. To reap the full performance potential of this architecture, we develop a set of centralized channel assignment, bandwidth allocation, and routing algorithms for multi-channel wireless mesh networks. A detailed performance evaluation shows that with intelligent channel and bandwidth assignment, equipping every wireless mesh network node with just 2 NICs operating on different channels can increase the total network goodput by a factor of up to 8 compared with the conventional single-channel ad hoc network architecture.
Raniwala et al. (Thu,) studied this question.