The structure of the vorticity field in homogeneous turbulent flows

The structure of the vorticity fields in homogeneous turbulent shear flow and various irrotational straining flows is examined using results from direct numerical simulations of the unsteady, incompressible Navier-Stokes equations with up to 128 × 128 × 128 grid points. In homogeneous shear flow, the distribution of the inclination angle of the vorticity vectors and contour plots of two-point correlations of both velocity and vorticity are consistent with the existence of persistent vortical structures inclined with respect to the flow direction. Early in the development of these shear flows, the angle of inclination at which most of these structures are found is near 45°; after the flow develops, this angle lies between 35°–40°. Instantaneous vorticity-vector and vortex-line plots confirm the presence of hairpin vortices in this flow at the two Reynolds numbers simulated. These vortices are formed by the roll-up of sheets of mean spanwise vorticity. The average hairpin leg spacing decreases with increasing Reynolds number but increases relative to the Taylor microscale for developed shear flows. Examination of irrotational axisymmetric contraction, axisymmetric expansion, and plane strain flows shows, as expected, that the vorticity tends to be aligned with the direction of positive strain. For example, the axisymmetric contraction flow is dominated by coherent longitudinal vortices. Without the presence of mean shear, however, hairpin structures do not develop. The simulations strongly indicate that the vorticity occurs in coherent filaments that are stretched and strengthened by the mean strain. When compressed, these filaments appear to buckle rather than to decrease in strength.