Permeability of granite under high pressure

The permeability of Westerly granite was measured as a function of effective pressure to 4 kb. A transient method was used, in which the decay of a small incremental change of pressure was observed; decay characteristics, when combined with dimensions of the sample and compressibility and viscosity of the fluid (water or argon) yielded permeability, k. k of the granite ranged from 350 nd (nanodarcy = 10−17 cm2) at 100-bar pressure to 4 nd at 4000 bars. Based on linear decay characteristics, Darcy's law apparently held even at this lowest value. Both k and electrical resistivity, ρs, of Westerly granite vary markedly with pressure, and the two are closely related by k = Cρs−1.5±0.1, where C is a constant. With this relationship, an extrapolated value of k at 10-kb pressure would be about 0.5 nd. This value is roughly equivalent to flow rates involved in solute diffusion but is still a great deal more rapid than volume diffusion. Measured permeability and porosity enable hydraulic radius and, hence, the shape of pore spaces in the granite to be estimated. The shapes (flat slits at low pressure, equidimensional pores at high pressure) are consistent with those deduced from elastic characteristics of the rock. From the strong dependence of k on effective pressure, rocks subject to high pore pressure will probably be relatively permeable.