Treatment of Uncertainty in Performance Assessments for Complex Systems

When viewed at a high level, performance assessments (PAs) for complex systems involve two types of uncertainty: stochastic uncertainty, which arises because the system under study can behave in many different ways, and subjective uncertainty, which arises from a lack of knowledge about quantities required within the computational implementation of the PA. Stochastic uncertainty is typically incorporated into a PA with an experimental design based on importance sampling and leads to the final results of the PA being expressed as a complementary cumulative distribution function (CCDF). Subjective uncertainty is usually treated with Monte Carlo techniques and leads to a distribution of CCDFs. This presentation discusses the use of the Kaplan/Garrick ordered triple representation for risk in maintaining a distinction between stochastic and subjective uncertainty in PAs for complex systems. The topics discussed include (1) the definition of scenarios and the calculation of scenario probabilities and consequences, (2) the separation of subjective and stochastic uncertainties, (3) the construction of CCDFs required in comparisons with regulatory standards (e.g., 40 CFR Part 191, Subpart B for the disposal of radioactive waste), and (4) the performance of uncertainty and sensitivity studies. Results obtained in a preliminary PA for the Waste Isolation Pilot Plant, an uncertainty and sensitivity analysis of the MACCS reactor accident consequence analysis model, and the NUREG‐1150 probabilistic risk assessments are used for illustration.