Incorporation of Passive Wing Folding in Flapping Wing Miniature Air Vehicles

Flapping wing motion produces positive lift in the down stroke and negative lift in the upstroke under zero forward velocity. Large birds frequently exhibit flight behavior where their wings are folded during the upstroke, thus lowering the air resistance as the wing is moved upwards. The result is reduced magnitude of negative lift produced during the upstroke, relative to the positive lift produced in the down stroke, where the wings are unfolded and the area is increased. We expect that by incorporating this style of upstroke wing folding into miniature air vehicle (MAV) platforms, beneficial flight properties would arise. Specifically, a portion of the wings’ overall lift will be generated by upstroke folding and downstroke unfolding, even at zero forward velocity. Such a capability will reduce the reliance on aerodynamic lift produced due to the forward motion of the MAV. This in turn would reduce the minimum flight-sustaining forward velocity and thus enhance MAV maneuverability by allowing for a reduced turning radius. Incorporating wing folding into a miniature air vehicle platform presents a unique challenge due to strict weight constraints present at small sizes. Using actuators to accomplish folding actively is not feasible due to the added weight of the actuators and the need for an on-board control system to synchronize the folding with the wing flapping motion. Therefore, the folding motion must be accomplished passively, since this is currently the only viable option in miniature MAVs. We have developed a passive, spatially distributed, one-way folding mechanism. This mechanism has been incorporated into a flying MAV testbed, and has successfully shown that the flapping wing MAV with folding wings is capable of flying at reduced forward velocity, while maintaining the payload carrying capacity.