Key points are not available for this paper at this time.
The elastic constants of pyrolytic graphite which has been highly ordered by annealing under compressive stress have been determined by ultrasonic, sonic resonance, and static test methods. Ultrasonic tests yielded the elastic constants c11, c12, c33, c44 = 1/s44, and the stress derivative of c33. The moduli 1/s11 and c44 were determined from the free flexural resonant vibrations of bars, and the shear modulus c44 also was determined from the fundamental torsional resonance of the bars and from the resonance of compound torsion oscillators composed of thin graphite disks with steel end pieces. Static tension, compression, and torsion tests on the pyrolytic graphite yielded a complete set of compliances (s11, s12, s13, s33, and s44). The following self-consistent set of elastic constants (cij in units of 1011 dyn/cm2; sij in 10−11 cm2/dyn) has been deduced from the results: c11 = 106±2, c12 = 18±2, c33 = 3.65±0.10, c13 = 1.5±0.5, c44 = 0.018 to 0.035, 1/s11 = 102±3, 1/s33 = 3.65±0.10, s12 = −0.0016±0.0006, s13 = −0.0033±0.0008, and s66 = 0.023±0.002; with the possible exception of c44, these constants are expected to be typical of the graphite single crystal. The shear strength for shear between basal planes was found to be in the range of 90–250 g/mm2.
Blakslee et al. (Wed,) studied this question.