Shear wave speed dispersion and attenuation in granular marine sediments

The reported compressional wave speed dispersion and attenuation could be explained by a modified gap stiffness model incorporated into the Biot model (the BIMGS model). In contrast, shear wave speed dispersion and attenuation have not been investigated in detail. No measurements of shear wave speed dispersion have been reported, and only Brunson's data provide the frequency characteristics of shear wave attenuation. In this study, Brunson's attenuation measurements are compared to predictions using the Biot-Stoll model and the BIMGS model. It is shown that the BIMGS model accurately predicts the frequency dependence of shear wave attenuation. Then, the shear wave speed dispersion and attenuation in water-saturated silica sand are measured in the frequency range of 4-20 kHz. The vertical stress applied to the sample is 17.6 kPa. The temperature of the sample is set to be 5 °C, 20 °C, and 35 °C in order to change the relaxation frequency in the BIMGS model. The measured results are compared with those calculated using the Biot-Stoll model and the BIMGS model. It is shown that the shear wave speed dispersion and attenuation are predicted accurately by using the BIMGS model.