Does increasing the intersection gap to 5 or 10 mm in cardiac MRI affect the accuracy of left ventricular volume, ejection fraction, and wall thickness measurements in patients after myocardial infarction?
Increasing the intersection gap to 5 or 10 mm in cardiac MRI short-axis imaging does not significantly compromise the accuracy of left ventricular volume, ejection fraction, and wall thickness measurements in post-MI patients.
PURPOSE: To determine the extent to which the number of planes imaged at magnetic resonance (MR) imaging could be reduced without modifying the calculated volume and thickness of the left ventricle. MATERIALS AND METHODS: Sixty-one patients were examined after a myocardial infarction. The whole left ventricle was imaged by using 5-mm contiguous breath-hold cine MR short-axis sections with no gap (SAng) (two-dimensional fast low-angle shot sequence, 9/4.8 repetition time msec/echo time msec). The effect of omitting one section in two (short-axis sections with 5-mm gap SA5 mm) or two sections in three (short-axis sections with 10-mm gap SA10 mm) was studied. RESULTS: In the comparison of SA5 mm or SA10 mm with respect to the reference SAng, the standard error of the estimate (SEE) for the diastolic volume did not exceed the 6.1% interobserver SEE, and the SEE for the ejection fraction remained lower than the 3% interobserver SEE. The measured wall thickness was not affected. In addition, six simple geometric models were compared with SAng and yielded an SEE of 9.5%-28.1% for the diastolic volume and 3.8%-13.3% for the ejection fraction. CONCLUSION: In the study of left ventricles with heterogeneous contractility, short-axis imaging is more accurate than geometric modeling and permits wall thickness measurements when an intersection gap of 5 or 10 mm is used.
Cottin et al. (Mon,) studied this question.