Key points are not available for this paper at this time.
This paper presents an approach and associated circuitry for harvesting near maximum output power from electromagnetic waves in the RF/microwave region of the spectrum with variable incident power densities in the range of tens of muW/cm 2 . It is shown that open loop resistor emulation at the input port of a power converter is a suitable solution for tracking the peak power point of a low-power rectifying antenna source over a wide range of incident RF power densities. A boost converter with a simple low-power control approach for resistor emulation is presented. A hardware design example with detailed efficiency analysis is given using commercially available discrete circuitry. Experimental results are presented for a system harvesting 420 muW to 8 muW from a 6 cm times 6 cm rectifying antenna with incident RF power ranging from 70 muW/cm 2 to 30 muW/cm 2 , respectively. The results demonstrate that resistor emulation is a simple and practical approach to energy harvesting with variable low-power radiative RF sources.
Paing et al. (Thu,) studied this question.