Key points are not available for this paper at this time.
Abstract Most of the central Himalayan glaciers have surface debris layers of variable thickness, which greatly affect the ablation rate. An attempt has been made to relate debris-cover thickness to glacier surface melting. Thirty stakes were used to calculate ablation for debris-covered and clean ice of Dokriani Glacier (7 km 2 ) from 2009/10 to 2012/13. Our study revealed significant altitude-wise difference in the rate of clean and debris-covered ice melting. We found a high correlation ( R 2 = 0.92) between mean annual clean-ice ablation and altitude, and a very low correlation ( R 2 = 0.14) between debris-covered ice melting and altitude. Debris-covered ice ablation varies with variation in debris thickness from 1 to 40 cm; ablation was maximum under debris thicknesses of 1–6 cm and minimum under 40 cm. Even a small debris-cover thickness (1–2 cm) reduces ice melting as compared to that of clean ice on an annual basis. Overall, debris-covered ice ablation during the study period was observed to be 37% less than clean-ice ablation. Strong downwasting was also observed in the Dokriani Glacier ablation area, with average annual ablation of 1.82 m w.e. a –1 in a similar period. Our study suggests that a thinning glacier rapidly becomes debris-covered over the ablation area, reducing the rate of ice loss.
Pratap et al. (Wed,) studied this question.