Key points are not available for this paper at this time.
Cubic zirconia containing 10 mol% yttria was deformed along the hard 〈100〉 direction and materials with 15 and 20 mol% yttria along the soft 〈112〉 orientation between 1400 °C and the lowest possible temperatures without brittle failure. The 10% material shows along 〈100〉 a strong increase in the flow stress at decreasing temperature, while the materials with 15 and 20 mol% yttria along 〈112〉 exhibit a higher flow stress with a weak temperature dependence. The activation parameters of deformation were measured by stress relaxation and temperature change tests. The microstructures are studied by high-voltage transmission electron microscopy. The results are interpreted by long-range interactions between the dislocations, the Peierls mechanism at the lowest temperatures, precipitation hardening between 500 °C and 800 °C, and by recovery-controlled deformation at high temperatures. The occurrence of plastic instabilities are described in Part II phys. stat. sol. (a) 201, No. 1 (2004) of this paper. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Tikhonovsky et al. (Mon,) studied this question.