Quantitative MRI measurement of lung density must account for the change in T with lung inflation

PURPOSE: To evaluate lung water density at three different levels of lung inflation in normal lungs using a fast gradient echo sequence developed for rapid imaging. MATERIALS AND METHODS: Ten healthy volunteers were imaged with a fast gradient echo sequence that collects 12 images alternating between two closely spaced echoes in a single 9-s breathhold. Data were fit to a single exponential to determine lung water density and T(2) (*). Data were evaluated in a single imaging slice at total lung capacity (TLC), functional residual capacity (FRC), and residual volume (RV). Analysis of variance for repeated measures was used to statistically evaluate changes in T(2) (*) and lung water density across lung volumes, imaging plane, and spatial locations in the lung. RESULTS: In normal subjects (n = 10), T(2) (*) (and lung density/water density) was 1.2 +/- 0.1 msec (0.10 +/- 0.02), 1.8 +/- 0.2 ms (0.25 +/- 0.04), and 2.0 +/- 0.2 msec (0.27 +/- 0.03) at TLC, FRC, and RV, respectively. Results also show that there is a considerable intersubject variability in the values of T(2) (*). CONCLUSION: Data show that T(2) (*) in the lung is very short, and varies considerably with lung volume. Thus, if quantitative assessment of lung density within a breathhold is to be measured accurately, then it is necessary to also determine T(2) (*).