Turbulent Boundary-Layer Separation

This article summarizes our present understanding of the physical behavior of two-dimensional turbulent separated flows, which occur due to adverse pressure gradients around streamlined and bluff bodies. The physical behavior of turbulence is flow dependent, so detailed experimental infor­ mation is needed for understanding such flows and modeling their physics for calculation methods. An earlier review (Simpson 1 985) discussed in much detail prior experimental and computational work, and this was followed by an updated review of calculation methods only (Simpson 1 987). Here additional recent references are added to those cited in the two other works. By separation, we mean the entire process of departure or breakaway, or the breakdown of boundary-layer flow. An abrupt thickening of the rotational-flow region next to a wall and significant values of the normal­ to-wall velocity component must accompany breakaway, or otherwise this region would not have any significant interaction with the free-stream flow. This unwanted interaction causes a reduction in the performance of the flow device of interest (e. g. a loss of lift on an airfoil or a loss of pressure rise in a diffuser). It is too narrow a view to use vanishing surface shearing stress or flow reversal as the criterion for separation. Only in steady two-dimensional flow do these conditions usually accompany separation. In unsteady two­ dimensional flow the surface shear stress can change sign with flow reversal without the occurrence of breakaway_ Conversely, the breakdown of the boundary-layer concept can occur before any flow reversal is encountered. In three-dimensional flow the rotational layer can depart without the