Key points are not available for this paper at this time.
Abstract. An immobilized TiO2 photocatalyst with a high specific surface area was prepared on stainless steel woven meshes in order to be used packed in layers for water purification. Immobilization of such a complex shape needs a special coating technique. For this purpose, dip coating and electrophoretic deposition (EPD) techniques were used. The EPD technique gave the TiO2 coating films a better homogeneity and adhesion, fewer cracks, and a higher ·OH formation than the dip coating technique. The woven mesh structure packed in layers guaranteed an efficient light-penetration in water treatment reactor. A simple equation model was used to describe the distribution of light through the mesh layers in the presence of absorbing medium (e.g., colored water with humic acids). Maximum three or four coated meshes were enough to harvest the solar UV light from 300 nm to 400 nm with a high penetration efficiency. The separation distance between the mesh layers played an important role in the efficiency of solar light penetration through the coated mesh layers, especially in case of colored water contaminated with high concentrations of humic acid.
El‐Kalliny et al. (Tue,) studied this question.