Key points are not available for this paper at this time.
This paper presents a comparative analysis of the traffic performances of turbo-roundabouts and roundabouts in terms of capacity and delays. We chose to use a recent German procedure for roundabouts included in “Kreisel” software as our calculation procedure to determine the capacity of turbo-roundabouts. We found that the capacities of turbo-roundabout secondary entries were higher than roundabout capacities when the traffic flow in the inner lane of the circle is high and the traffic flow in the outer lane of the circle is in the low to lower-middle range. On the contrary, the capacities of the main entries to roundabouts are always higher than the capacities of the main entries to turbo-roundabouts. Taking into account the arithmetic or weighted mean behavior of the four entries, the total capacities of turbo-roundabouts, at both saturated and undersaturated conditions, are, in most cases, higher than the total capacities of roundabouts. In most of the important practical situations analyzed, delays were slightly shorter for turbo-roundabouts than for roundabouts, especially for high traffic flows in the circle lanes.
Mauro et al. (Fri,) studied this question.