Key points are not available for this paper at this time.
Abstract A novel strain-energy function which is a simple cubic equation in the invariant ( I 1 −3 ) is proposed for the characterization of the elastic properties of carbon-black-filled rubber vulcanizates. Conceptually, the proposed function is a material model with a shear modulus which varies with deformation. This contrasts with the neo-Hookean and Mooney-Rivlin models which have a constant shear modulus. The variation of shear modulus with deformation is commonly observed with filled rubbers. Initially, the modulus falls with increasing deformation, leading to a flattening of the shear stress/strain curve. At large deformations, the modulus rises again due to finite extensibility of the network, accentuated by the strain amplication effect of the filler. This characteristic behavior of filled rubbers may be described approximately by the proposed strain-energy function by requiring the coefficient C 20 to be negative, while the coefficients C 10 and C 30 are positive. The use of the proposed strain-energy function has been shown to permit the prediction of stress/strain behavior in different deformation modes from data obtained in one simple deformation mode. This circumvents the need for a rather difficult experiment in general biaxial extension. The simple form of the proposed function also simplifies the regression analysis. This strain-energy function is consistent with the general Rivlin strain-energy function and is easily obtained from the popular third-order deformation approximation. Thus, it is already available in many existing finite-element analysis programs.
O. H. Yeoh (Thu,) studied this question.