Key points are not available for this paper at this time.
Three-dimensional motion capture and metabolic assessment were performed on four standardbred horses while walking, trotting and galloping on a motorized treadmill at different speeds. The mechanical work was partitioned into the internal work (W(INT)), due to the speed changes of body segments with respect to the body centre of mass, and the external work (W(EXT)), due to the position and speed changes of the body centre of mass with respect to the environment. The estimated total mechanical work (W(TOT)=W(INT)+W(EXT)) increased with speed, while metabolic work (C) remained rather constant. As a consequence, the 'apparent efficiency' (eff(APP)=W(TOT)/C) increased from 10 % (walking) to over 100 % (galloping), setting the highest value to date for terrestrial locomotion. The contribution of elastic structures in the horse's limbs was evaluated by calculating the elastic energy stored and released during a single bounce (W(EL,BOUNCE)), which was approximately 1.23 J kg(-)(1) for trotting and up to 6 J kg(-)(1) for galloping. When taking into account the elastic energy stored by the spine bending and released as W(INT), as suggested in the literature for galloping, W(EL,BOUNCE) was reduced by 0.88 J kg(-)(1). Indirect evidence indicates that force, in addition to mechanical work, is also a determinant of the metabolic energy expenditure in horse locomotion.
Minetti et al. (Wed,) studied this question.