Key points are not available for this paper at this time.
Contact angle saturation in electrowetting‐on‐dielectrics (EWOD) has restricted the tuning range of the wettability of a solid surface, which has generally limited the performances of EWOD devices such as digital microfluidics, lab‐on‐chip, electronic displays, and so forth. Here, a method is proposed for decreasing the saturated contact angle by controlling the behavior of charge trapping at the liquid–solid interface. An unexpected phenomenon is uncovered: for a short time the contact angle reaches smaller values before it retreats to its saturation value, which is caused by charge trapping at the liquid–solid interface. Experimental results suggest that the trapped charges can be repeatedly detrapped and retrapped when the polarity of the applied voltage is periodically reversed, which results in contact angles retreating periodically. By applying a well‐modulated voltage signal with reversing polarity, the retreat movement of the contact angle can be controlled to obtain a value significantly smaller than the previously possible threshold. As a specific application of this method, an economic two‐step process which is developed potentially suitable for mass‐producing large‐area flexible microlens arrays with controllable curvatures and wide fields of view.
Li et al. (Thu,) studied this question.