Key points are not available for this paper at this time.
An interference-mitigated ZigBee-based advanced metering infrastructure (AMI) solution, namely IMM2ZM, has been developed for high-traffics smart metering (SM). The IMM2ZM incorporates multiradios multichannels network architecture and features an interference mitigation design by using multiobjective optimization. To evaluate the performance of the network due to interference, the channel-swapping time (T cs ) has been investigated. Analysis shows that when the sensitivity (PRχ) is less than -12 dBm, Tcs increases tremendously. Evaluation shows that there are significant improvements in the performance of the application-layer transmission rate (σ) and the average delay (D). The improvement figures are σ > ~300% and D > 70% in a 10-floor building, σ > ~280 % and D > 65% in a 20-floor building, and σ > ~270% and D > 56% in a 30-floor building. Further analysis reveals that IMM2ZM results in typically less than 0.43 s delay for a 30-floor building under interference. This performance fulfills the latency requirement of less than 0.5 s for SMs in the USA (Magazine of Department of Energy Communications, USA, 2010). The IMM2ZM provides a high-traffics interference-mitigated ZigBee AMI solution.
Ran et al. (Wed,) studied this question.