Key points are not available for this paper at this time.
2D semiconductors allow for unique and ultrasensitive devices to be fabricated for applications ranging from clinical diagnosis instruments to low-energy light-emitting diodes (LEDs). Graphene has championed research in this field since it was first fabricated; however, its zero bandgap creates many challenges. Transition metal dichalcogenides (TMDCs), e.g., MoS2, have a direct bandgap which alleviates the challenge of creating a bandgap in graphene-based devices. Water wettability of MoS2 is critical to device fabrication/performance and MoS2 has been believed to be hydrophobic. Herein, we report that water contact angle (WCA) of freshly exfoliated MoS2 shows temporal evolution with an intrinsic WCA of 69.0 ± 3.8° that increases to 89.0 ± 3.1° after 1 day exposure to ambient air. ATR-FTIR and ellipsometry show that the fresh, intrinsically mildly hydrophilic MoS2 surface adsorbs hydrocarbons from ambient air and thus becomes hydrophobic.
Kozbial et al. (Tue,) studied this question.