A real-time patient health monitoring and alarming system using a wireless sensor network was successfully designed and tested, demonstrating accurate scanning and reliable communication.
A low-cost wireless sensor network prototype for real-time patient health monitoring was successfully designed and tested.
The main objective of this research is design and realization of real-time monitoring and alarming system for patient health, especially for patients suffering from diseases during their normal life. The proposed system has an embedded microcontroller connected to a set of medical sensors (related to the patient case) and a wireless communication module (Bluetooth). Each patient is considered as a node in a wireless sensor network and connected to a central node installed at the medical center through an internet connection. The embedded microcontroller checks if the patient health status is going well or not by analyzing the scanned medical signals. If the analysis results are abnormal, the embedded unit uses the patient's phone to transmit these signals directly to the medical center. In this case, the doctor will send medical advice to the patient to save his/her life. The implemented prototype has been tested and calibrated with standard devices. The experimental results confirm the effectiveness of the proposed system that is accurate in scanning, clear in monitoring, intelligent in decision making, reliable in communication, and cheap (about 100 US).
Al-Aubidy et al. (Tue,) conducted a other in patients suffering from diseases during their normal life. Real-time monitoring and alarming system using wireless-sensor-network was evaluated on Prototype testing and calibration. A real-time patient health monitoring and alarming system using a wireless sensor network was successfully designed and tested, demonstrating accurate scanning and reliable communication.