Key points are not available for this paper at this time.
Activated carbon was prepared from pyrolyzed pinewood char using KOH, H3PO4, H2O2, and heat-only treatments. Activated carbon prepared by the heat-only treatment had a total surface area of 233.2 m2/g, a total pore volume of 0.138 cm3/g, a microporous surface area of 129.9 m2/g, and a microporous volume of 0.07 cm3/g. The most significant improvement of pore properties for the chemically treated pinewood char was obtained by the KOH treatment, which produced a total surface area of 1124.4 m2/g, a total pore volume of 0.723 cm3/g, a microporous surface area of 923.6 m2/g, and a microporous volume of 0.485 cm3/g. After the H3PO4 treatment, pinewood char had a total surface area of 455.5 m2/g, a total pore volume of 0.251 cm3/g, a microporous surface area of 393.3 m2/g, and a microporous volume of 0.211 cm3/g. The least significant improvement was obtained from the H2O2 treatment, which produced a total surface area of 363.0 m2/g, a total pore volume of 0.202 cm3/g, a microporous surface area of 271.5 m2/g, and a microporous volume of 0.141 cm3/g. Transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) were performed to compare separate treatment stabilities and functional group properties.
Luo et al. (2016) studied this question.