Key points are not available for this paper at this time.
In South Korea, the evaluation criteria for installing shading devices are defined by regulations, but the standards of design methods are not clearly established. The installation of shading devices has become mandatory for some public buildings due to revised regulations. Therefore, a design of horizontal shading device is required, and indoor environmental problems which may occur due to their installation should also be taken into consideration. This research aimed to propose a design which takes into account the energy consumption which may occur if the horizontal shading device is installed and suggests an improved design method of horizontal shading devices when they are installed. Consequently, it was confirmed that as the protrusion of the horizontal shading device becomes longer, the incoming daylight is reduced and the indoor intensity of illumination becomes lower, and thus more lighting energy may be consumed in a room where the shading device is installed than in the one where it is not. Therefore, annual energy consumption was calculated by applying the lighting control and it was found that the total energy consumption decreased by the reduction of air-conditioning and fans and lighting energy consumption.
Building similarity graph...
Analyzing shared references across papers
Loading...
Seok-Hyun Kim
Kyung-Ju Shin
Hyo-Jun Kim
International Journal of Polymer Science
SHILAP Revista de lepidopterología
Yeungnam University
Building similarity graph...
Analyzing shared references across papers
Loading...
Kim et al. (Sun,) studied this question.
www.synapsesocial.com/papers/69d77eeea9e24f7f0ff30753 — DOI: https://doi.org/10.1155/2017/3025092