Key points are not available for this paper at this time.
Hysteretic effects are investigated in perovskite solar cells in the standard FTO/TiO2/CH3NH3PbI3–xClx/spiro-OMeTAD/Au configuration. We report normal (NH) and inverted hysteresis (IH) in the J–V characteristics occurring for the same device structure, and the behavior strictly depends on the prepoling bias. NH typically appears at prepoling biases larger than the open circuit bias, while pronounced IH occurs for negative bias prepoling. The transition from NH to IH is marked by an intermediate mixed hysteresis behavior characterized by a crossing point in the J–V characteristics. The measured J–V characteristics are explained quantitatively by the dynamic electrical model. Furthermore, the influence of the bias scan rate on the NH/IH hysteresis is discussed based on the time evolution of the accumulated ionic and electronic polarization charge at the interfaces. Introducing a three-step measurement protocol, which includes stabilization, prepoling, and measurement, we put forward the difficulties and possible solutions for a correct photoconversion efficiency evaluation.
Nemneş et al. (Thu,) studied this question.