Key points are not available for this paper at this time.
Scalable, low-cost and highly efficient catalysis of oxygen electrocatalytic reactions (ORR/OER) are required for the rapid development of clean and renewable energy conversion/storage technologies. Herein, two types of α-MnO2 nanorods were prepared under hydrothermal treatment at 150 °C for 0.5 h (MnO2-150-0.5) or 120 °C for 12 h (MnO2-120-12), then supported on N-doped ketjenblack carbon (N-KB) as bi-functional ORR/OER catalysts. Their electrocatalytic activities toward ORR and OER were investigated systematically. As a result, MnO2-150-0.5/N-KB displays superior ORR catalytic activity, with much more positive half-wave potential and much larger limiting current density (0.76 V and 6.0 mA cm−2), comparable to those of 20 wt. % Pt/C (0.82 V and 5.10 mA cm−2). MnO2-150-0.5/N-KB also shows high electron transfer number (3.86~3.97) and low yield of peroxides (1–7%) during ORR process in the whole potential range of 0–1.0 V (vs. RHE). Meanwhile, the MnO2-150-0.5/N-KB also exhibits better OER activity with low overpotential, comparable to IrO2/N-KB. The excellent electrocatalytic activity of MnO2-150-0.5/N-KB can be attributed to the synergistic effect, relatively smaller size, higher amount of Mn3+, and low charge transfer resistance. This work offers a new strategy for scalable preparation of more efficient and cost-effective α-MnO2 bi-functional oxygen catalysts.
Wang et al. (Fri,) studied this question.